2019 Chevy Blazer Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 · (Edited)
Hello all! We chose the Base RS FWD to save on weight. We come from a back ground of tuners and so we are trying to do the same with our chevy. We would like the vehicle a little lower to fit the tires in the wheel well better. Already swapped out the stock wheels for some Milani 20x9.5 using the stock tire. The tire is stretched a little so I'd doesn't sit as flush with the rim. No rubbing issues or driveability concerns. We Limo Tinted all the windows except the front 2 and added a 20" fold down screen. Shooting for 400 Hp at the crank. Hopefully some type of spoiler is released to finish off the top end of the vehicle. Thanks guys!
Mods:
K and N drop in filter
Limo Tint
20" drop down DVD player
20x9.5 Milani Switchback
OEM Tow Hitch

Future Mods:
Intake
Header
Exhaust
Tune
Lip Spoiler
Complete Coil Over
 

Attachments

·
Registered
Joined
·
30 Posts
Discussion Starter · #8 ·
Yes, spring and shock. We have lowered vehicles in the past with springs only but I don't feel the quality of ride is as good as it could have been. Stock shocks were not designed to work with 1.5" compression. But yah, there are no options for anything. If all else fails we will start looking into cross platform LGX parts From the Camaro.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top