2019 Chevy Blazer Forum banner

1 - 20 of 50 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
Well Magnaflow shows a part # and information on a performance exhaust system!

373
 

·
Registered
Joined
·
54 Posts
Discussion Starter #6
definitely like to know , have one in my in box just have not pulled the trigger
I reached out to Magnaflow to ask about the tips fitting out the stock bumper since the stock exhaust on the RS has a different tip and they claim to have test fit perfect but can't provide any pictures. Kind of want to see one with it on and a sound check before I pull the trigger but then again I'm impatient lol
 

·
Registered
Joined
·
117 Posts
I love how Magnaflow tells you that there's "moderate" exterior sound and "mild" interior sound with the exhaust system haha.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #10
Im 100% waiting to see and hear before i spend $1200
Use promo code: 2hppy2020 for 20% off.
My total was $947.18 and the place that's going to do the install quoted me $150. Total will be $1097.18
I'll see what I can do about more pictures and a video once completed. My Blazer is also White like the above picture.
 

·
Registered
Joined
·
4 Posts
I wouldn't expect much difference in the performance. Cat-Back systems don't usually help with HP. Have to do headers and a Dyno tune to then get horsepower increases. But a Dyno tune will usually get you some HP increase, and then headers and Cat-Back will give you a bit more HP.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #15
I wouldn't expect much difference in the performance. Cat-Back systems don't usually help with HP. Have to do headers and a Dyno tune to then get horsepower increases. But a Dyno tune will usually get you some HP increase, and then headers and Cat-Back will give you a bit more HP.
Yeah, I'm not expecting much for HP gains or anything. I should say this is to get the quad tip exhaust and a little sound out of the vehicle. Haven't seen much else for mods yet but keep looking. That supercharger they are creating is looking for interesting.

Again I talked with Magnaflow and they have the first production run of these systems expected to be finished first week of February.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #18
Well guys.. that was a failure. Cut of my exhaust had all the pieces in place for the install only to find out that this was only made for the FWD model and not AWD. Which was not displayed or mentioned for compatibility.

I talked with customer service and they admit that they messed up in not having that displayed on the part number. Very nice guy and is going to look for a AWD RS and get a prototype made up for me and sent out ASAP.
 

·
Registered
Joined
·
87 Posts
Well guys.. that was a failure. Cut of my exhaust had all the pieces in place for the install only to find out that this was only made for the FWD model and not AWD. Which was not displayed or mentioned for compatibility.

I talked with customer service and they admit that they messed up in not having that displayed on the part number. Very nice guy and is going to look for a AWD RS and get a prototype made up for me and sent out ASAP.
Yikes! I hope they can get you a working set soon. I can't believe that they did not think of the AWD models in their product.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #20
Yikes! I hope they can get you a working set soon. I can't believe that they did not think of the AWD models in their product.
I was to impatient to wait when the exhaust arrived at my warehouse at 10AM so I took off early and went to the shop to have it installed. Pretty sure I was the first person to figure out that it was only made for FWD when the resonator didn't fit with the bracket and then the mid pipe tried to go right through the rear axle canister. Which to find this out you had to have the old exhaust cut out. Thankfully we were able to weld the old one back on otherwise I'd be a more pissed then I already am... Can tell sound wise that it's welded on which sucks. I stopped at my local dealership this morning to check on the cost of having them install a factory exhaust, wasn't cheap. I would for sure make Magna Flow pay for that because I don't want my factory exhaust welded on because of a mistake on there part. Luckily they said they hope to have a AWD model in the shop this week, work on a prototype and get one made for me and sent out. He hoped to have something shipped to me by next Friday. So we will see what happens.
 
1 - 20 of 50 Posts
Top