2019 Chevy Blazer Forum banner
21 - 28 of 28 Posts

· Registered
2022 Chevy Blazer RS V6 - Black
Joined
·
54 Posts
Ok, a little follow-up on these LED flasher bulbs...

Easy install and they work great. Nice and bright and satisfied with that result. However, they don't fit very tight in the socket and I anticipate they will pop out eventually just due to travel vibration and/or bumps. If that becomes an issue, I will probably take them out and grind down a bit on the female end so they seat deeper. I'm curious to find out, Konfucius, if you confirm that they don't seat down real tight in the socket.

I'll keep an eye on these and report back if and when this happens.
 

· Registered
Joined
·
3 Posts
I have the same situation. Can I remove the led headlamp fixtures and install the xenon fixtures. They sook the same and there’s actually cover on the back you can easily get to to upgrade the bulbs. Any help would be appreciated!
Thanks,
Chris
 

· Registered
2022 Blazer RS V6 Black
Joined
·
102 Posts
I have the same situation. Can I remove the led headlamp fixtures and install the xenon fixtures. They sook the same and there’s actually cover on the back you can easily get to to upgrade the bulbs. Any help would be appreciated!
Thanks,
Chris
From what I've gathered here, some come with accessible headlight bulbs and some don't. You'll have to get in there and see what yours yields. I understand you're just replacing the whole housing with Xenon, so this doesn't apply to you so much. I changed my turn signal bulbs to LED because they were doable, but I didn't check the headlight bulbs to see if they could be changed out while I was in there, and once I realized I needed to check, I didn't want to mess with it again. Mine may very well be sealed beams and can't change them unless I change out the whole headlight assembly. Which at that point, I'm not spending that much money just to get LED headlights. Not worth it to me. If it's a simple fix, I'll do it.
 

· Super Moderator
2021 RS AWD Pewter Metallic, Black interior, 21" wheels, pano roof
Joined
·
266 Posts
I’ll swap with you….we have the HID’s and want the LED housings if that’s what you are saying…
That sounds perfect! Do the driver and passenger side mount up the same and plug in without issues?
Thanks!!
Chris
no, pretty sure the plugs are different, but I believe adapters are available plus ballasts with the bulbs….but the housings should mount the same
 
21 - 28 of 28 Posts
Top