2019 Chevy Blazer Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
So I’m going to replace my hid projector for some Bi led projectors rated at 20,000 lumens for the pair. It’s a high/low beam. By the looks of the the headlight housing I might have to retrofit and modified abit hopefully it works out well.
1189
1190
 

· Registered
Joined
·
45 Posts
Discussion Starter · #7 ·
It has a clear cut off line and it lights up the road the projectors are 10’000 lumens each so both projectors put out 20,000 lumens more than enough to light up the whole highway. So the brand is KUS bi led projectors I’ll show more pictures of how I retrofit.
 

· Registered
Joined
·
2 Posts
It has a clear cut off line and it lights up the road the projectors are 10’000 lumens each so both projectors put out 20,000 lumens more than enough to light up the whole highway. So the brand is KUS bi led projectors I’ll show more pictures of how I retrofit.
Any more info on this retrofit? How did they mount to the factory housing and what connectors did you use to switch over from D3S plugs.
 

· Registered
Joined
·
1 Posts
It has a clear cut off line and it lights up the road the projectors are 10’000 lumens each so both projectors put out 20,000 lumens more than enough to light up the whole highway. So the brand is KUS bi led projectors I’ll show more pictures of how I retrofit.
I have a 2019 Blazer premier that I inherited from my Father this past summer. I didn't realize the headlights were so poor until winter and it was darker sooner. They are HID. What year and lights do you have? I went to a dealer and they put mine and another 19 next to each other on a garage door at dealer and said they were aimed properly. They said if they adjust up to see further the high beams would point at the sky. I am frustrated and looking for ways to replace with something brighter. I asked a local custom auto lighting shop via text and phone about the bi led projectors and he said its not the hid but the housing and pointed me to ebay for a 19-20 housing. why would I put the same housing in? Could you dm me for advise on what you have done. It appears buying the projectors is the way to go as you have done.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top