2019 Chevy Blazer Forum banner
1 - 1 of 1 Posts

· Registered
530 Posts
Discussion Starter · #1 ·
A Blazer with better fuel efficiency via an engine with lower displacement is coming!


In addition to the 2020 Blazer, the LSY engine can also be found across a wide variety of GM products, including 2019 and 2020 Cadillac XT4, 2020 GMC Acadia, 2020 Cadillac XT5 the Chinese-spec Cadillac XT6, as well as the new Cadillac CT4 and CT5. In each of these applications, power is rated between 230 and 235 horsepower at 5,000 rpm, and 258 pound-feet of torque at between 1,500 rpm and 4,000 rpm.
On the 2020 Chevrolet Blazer, the boosted four-banger is standard on the 2LT and 3LT mid-range trim levels, though both models can be upgraded to the naturally-aspirated 3.6L V6 LGX engine.
2020 Chevrolet Blazer Engine Lineup
Standard Engine:2.5L I-4 LCV2.5L I-4 LCVTurbo 2.0L I-4 LSYTurbo 2.0L I-4 LSY3.6L V-6 LGX3.6L V-6 LGX
Optional Engine:NoneNone3.6L V-6 LGX3.6L V-6 LGXNoneNone
The rest of the 2020 Blazer engine lineup includes the 2.5L four-cylinder LCV and 3.6L V6 LGX, both of which also feature a DOHC configuration with VVT, SIDI, and an automatic engine Stop/Start feature. Output for the LCV is rated at 193 horsepower and 188 pound-feet of torque, while the LGX doles out 308 horsepower and 270 pound-feet of torque. All three engines are mated to the new GM 9-speed automatic transmission.
2020 Chevrolet Blazer Engine Specs
DisplacementConfiguration & CylindersAspirationIgnitionValvetrainEngine Stop/StartPower (hp / kW @ RPM)Torque (lb-ft / Nm @ RPM)
LCV:2.5Linline four-cylindernaturally aspiratedSIDIDOHC with VVTStandard193 / 144 @ 6300188 / 255 @ 4400
LSY:2.0Linline four-cylinderturbochargedSIDIDOHC with VVTStandard230 / 172 @ 5000258 / 349.8 @ 1500 – 4000
LGX:3.6LV6naturally aspiratedSIDIDOHC with VVTStandard308 / 230 @ 6600270 / 365 @ 5000

Read more: http://gmauthority.com/blog/2019/06/2020-chevrolet-blazer-the-complete-engine-lineup/#ixzz5sUCPhyGO
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.